Commercial Specification Heat Trace Safety Shower Experts

Protect your employees from hazardous or corrosive chemicals with our Commercial Heat Trace Safety Shower. With the HTS-1 your employees can shower immediately following an incident in all weather conditions.

The Empteezy HTS-1 is a traced heat decontamination shower that is protected against freezing by means of trace heat cabling and an insulated jacket which gives protection down to -25°C.

It’s designed to thoroughly drench the head and body with water during an emergency situation.

The water supply is via a bottom feed supply and the shower head is activated by high visibility yellow pull handle which opens the “stay-open” valve, which means that the shower will continue to operate until the valve is closed by pushing the handle back into the “up” position.

This safety shower is perfect for factories, laboratories and numerous other environments. It takes up little floor space and is incredibly easy to operate.

Available Options Include

  • Bullhorn eye wash
  • Galvanised or stainless steel waste water collection sumps
  • Galvanised or stainless steel cubicles with collections sumps
  • Commercial electrics PIR lighting
  • Commercial electrics Alarm/sounder with proximity switch
  • ATEX Zone 1 Lighting
  • ATEX Trace heating
  • ATEX Zone 1 Alarm/sounder with proximity switch

Alternative Products

 

FSCS – Combination Shower 

  • Water Inlet: 1¼” BSP
  • Shower flow rate: Regulated at 110lpm
  • Shower operation: Pull handle
  • Shower valve: Full bore 1”
  • Eyewash flow rate: 22lpm
  • Total weight: 21kg
  • Dimensions:76 x 25 x 20cm


FSCS-SD – Self Drain Combination Shower

  • Water Inlet: 1¼” BSP
  • Shower flow rate: Regulated at 110lpm
  • Shower operation: Pull handle
  • Shower valve: Full bore 1”
  • Eyewash flow rate: 22lpm
  • Total weight: 21kg
  • Dimensions:76 x 25 x 20cm

 

FSCS-SS – Stainless Steel Combination Shower

  • Water Inlet:1¼” BSP
  • Shower flow rate: Regulated at 110lpm
  • Shower operation: Pull handle
  • Shower valve: Full bore 1”
  • Eyewash flow rate: 22lpm
  • Total weight: 20kg
  • Dimensions: 76 x 26 x 22cm

 

SE-1200 – Speakman® Combination Shower

  • Water Inlet: 1¼” BSP
  • Shower flow rate: Regulated at 110lpm
  • Shower operation: Pull handle
  • Shower valve: Full bore 1”
  • Eyewash flow rate: 22lpm
  • Total weight: 21kg
  • Dimensions: 76 x 25 x 20cm

 

For more information on the HTS-1, please visit our website and contact us today at advice@empteezy.co.uk or even call us on 01506 430 309 if you’d prefer to chat with us.